How to Put On and Adjust a Chain Teddy for a Curvy Fit

Quick answer

Put the teddy on before you fasten or tighten any chain, then adjust the straps and chain length in front of a mirror so the cups sit flat and the chain lies flat against your skin. Make small changes one at a time and recheck the fit after each one.

Step-by-step: putting on and adjusting a chain teddy

1. Step 1: Loosen every adjustable point first: Before you step into the teddy, open the collar, cuffs, and any strap sliders so the garment is at its loosest. Common mistake: fastening the collar first and then trying to pull the teddy into place, which twists the chain and strains the fabric. If a chain or strap has no slack, stop and check whether it is meant to be adjustable before forcing it.
2. Step 2: Step in and settle the cups: Step into the teddy and bring it up so the soft cups sit flat against your bust with no folding at the edges. Reach inside to smooth the fabric and center the cut-out front. Checkpoint: the cups should cover the bust without pressing it flat or leaving a gap at the top.
3. Step 3: Fasten the G-string back and check the seat: Fasten the back closure and let the G-string settle naturally. Run a finger under the back edge to confirm it lies flat rather than cutting in. Common mistake: pulling the back up too high to compensate for a loose front, which throws off the whole fit.
4. Step 4: Set the collar and chain length: Fasten the chain-detailed neck collar so it rests at the base of your neck without pressing on your throat. Let the Cuban-linked chain hang and check that it falls evenly on both sides. If the chain is too long, shorten it at the nearest O-ring or clasp point rather than knotting it. The chain should touch your skin lightly, not pull the neckline down.
5. Step 5: Adjust cuffs and O-rings last: With the body and collar set, fasten the cuffs so they sit snug but still allow a finger underneath. Use the O-rings as anchor points to route the chain symmetrically. Common mistake: tightening cuffs until they leave marks, which is a sign to go one size looser.
6. Step 6: Do a mirror check and a movement test: Stand in front of a mirror and check that the cut-out front is centered, the cups are smooth, and the chain hangs evenly. Then sit, raise your arms, and bend slightly to see whether anything digs in or shifts. Adjust one point at a time and recheck. If the chain swings to one side when you move, shorten the longer side rather than tightening the collar.
7. Step 7: Remove and store without tangling: Unfasten the cuffs and collar first, then the back closure, and lay the teddy flat. Close each clasp before storage so the Cuban-linked chain cannot catch on itself. For chain detail lingerie care, hand-wash in cool water and dry flat away from direct heat; do not tumble dry. Store the chain flat or hang the teddy so the chain hangs free, never in a tangled drawer.

Product facts to know

• Fetish Curvy Submissive Chain Teddy: This plunge teddy is made from sleek vinyl with soft vinyl cups, a plunging cut-out front, a G-string back, and a chain-detailed neck collar with O-rings, cuffs, and a Cuban-linked chain. The soft cups and cut-out front are designed to follow the bust curve, while the collar, O-rings, and cuffs give you several points to adjust for a closer, more even fit.